Fluid Bed Processor
2, 10, 30, 60, 120,150, 200, 250,300 & 350 Kgs.
The basic machine is with facility of Top Spraying & Drying
Chitra Fluid Bed Processor provides processing flexibility for the production of granules and uniform drying.
The unit consists of…………………………
• Inlet air handling unit. ( AHU or APU )
• Inlet duct with b/f valve.
• Inlet air plenum with pneumatic gaskets and wash water drain port and ports for nozzle inserts.
• Product container with trolley.
• Expansions chamber / filter bag chamber with filter & 02 nos. of side supports.
• Filter bag chamber with filter & 02 nos. side supports.
• Outlet air duct.
• Exhaust air blower assembly with motor.
• Control Panel & Operating panel.
• Pneumatic Panel.
• Solution spray system with solution preparation vessel,
Peristaltic Pump, spray nozzle & silicon tubing.
• A.C. Frequency drive for all motors.
• Sampling port at product container.
• Quick opening system for container sieve.
• Wash water drain port with valve at inlet plenum.
• All rubber gaskets of silicon.
• All light and sight glass with T/C clamp facility.
• cGMP construction.
No information Available.
• All contact parts made out of SS316 / 316 L
• Inside of the all contact parts will be @ mirror finish and out side of all contact parts @ matt finish
and non contact part @ matt finish.
• Differential pressure trans-meter for Filter bag for HEPA filter at AHU & at bowl / sieve.
• WIP port and nozzles.
• Pneumatic inflatable gaskets at bottom and top of the product container for air discharge bag sealing.
• Material charging ports, suitable for gravity and vacuum.
• PLC based power panel with touch screen based operating panel for automated process controls.
• Dew Point Sensor at inlet air duct, instead of Rh sensor at AHU.
• Velocity Trans-meter for CFM measurement.
• Differential Trans-meter instead differential pressure gauge at AHU and
Differential Pressure Trans - Meter for container sieve.
• Jacketed Vessel instead of non jacketed. (for Solution Preparation).
• Flameproof Motor & Flameproof enclosure for panel for Solution Preparation Vessel.
• Wet Scrubber at exhaust air.
• Steam & Chilled Water Controlling Valve.
• Peristaltic Pump of Master Flex-USA make instead of Indian make.
• Flow Meter at Solution Spray System. [ Emersion make ( USA ) – Coriolis Type.]
• Flameproof/Weatherproof Enclosure for Touch Screen.
• Additional Duct per 1 Meter – Non insulated / Insulated.
• Solid flow monitoring system / Broken bag detector.
• Dew point / Rh sensor @AHU.
• Flameproof motor for blower.