chitra-guest-view-product Portlet

Fluid Bed Multi Technology

Fluid Bed Multi Technology

The basic machine is with two different

processing insert…..

• Top Spray / Dryer Insert

• Wurster Insert ( Bottom Spray )

Chitra Fluid Bed Multi Technology provide processing flexibility for the production of granules & coating of
powders and pellets.

Top spray / Dryer insert for granulation & drying and Wurster for particle coating & pallet coating.

Download Datasheet Inquiry
• 2 bar sock resistance construction.
• All contact parts made out of SS316.
• All motor are of flameproof.
• Inside of the all contact parts will be @ mirror finish and outside of all contact parts @ matt finish.
• Rh trans-meter at AHU.
• Inlet, outlet & product bed temperature sensors.
• Differential pressure trans-meter for Filter bag & differential pressure gauge for Hepa filter at AHU.
• A.C. Frequency drive for all motors.
• Sampling port at product container.
• Quick opening system for container sieve.
• CIP port and nozzles.
• Material charging ports , suitable for gravity and vacuum.
• PLC based power panel with touch screen based operating panel for automated process controls.
• Wash water drain port with valve at inlet plenum.
• All rubber gaskets of silicon.
• All light and sight glass with T/C clamp facility.
• Pneumatic inflatable gaskets at bottom and top of the product container,
top of the expansion chamber and for air discharge bag sealing.
• cGMP construction.
• Inlet air handling unit. ( AHU or APU )
• Inlet duct with b/f valve. ( 06 meters, standard lenth )
• Inlet air plenum with pneumatic gaskets and wash water
drain port and ports for nozzle inserts.
• Processing inserts………
(A) Top Spray / Dryer Insert
(B) Wurster Insert.
• Expansions chamber..
• Filter bag chamber with filter & 02 nos. side supports.
• Filter cleaning system.
• Outlet air duct.
• Exhaust air blower assembly with motor.
• Control Panel & Operating panel.
• Pneumatic Panel.
• Solution spray system with solution preparation vessel,
Peristaltic Pump, spray nozzle & silicon tubing.
• Dew Point Sensor at inlet air duct, instead of Rh sensor at AHU.
• Velocity Trans-meter for CFM measurement.
• Differential Trans-meter instead differential pressure gauge at AHU and
Differential Pressure Trans - Meter for container sieve.
• Jacketed Vessel instead of non jacketed. (for Solution Preparation.).
• Flameproof Motor & Flameproof enclosure for panel for Solution Preparation Vessel.
• Wet Scrubber at exhaust air.
• Steam & Chilled Water Controlling Valve.
• Peristaltic Pump of Master Flex-USA make instead of Indian make.
• Flow Meter at Solution Spray System. [ Emersion make ( USA ) – Coriolis Type.]
• Flameproof/Weatherproof Enclosure for Touch Screen.
• Additional Duct per 1 Meter – Non insulated / Insulated.
• Solid flow monitoring system.
• Reduce capacity bowl for top spray & bottom spray.

chitra-footer Portlet

©2018All Rights Reserved Terms of Use and Privacy Policy